Royal Enfield Bullet 350 2019, Owner'S Manual

Page: 39 / 68

37
INSPECTION OF TYRES AND WHEELS
 Inspect the tyres periodically for tread wear, cracks
and cuts.
Minimum tread depth :
Front tyre : 1 mm Rear tyre : 2 mm
CLEANING AND ADJUSTING PLUG GAP
SPARK PLUG
MINOR MAINTENANCE TIPS
Front Rear
Solo 1.41 kg/cm
2
(20 PSI) 2.21 kg/cm
2
(30 PSI)
With Pillion 1.55 kg/cm
2
(22 PSI) 2.20 kg/cm
2
(32 PSI)
Gap 0.80 to 0.90 mm.

Two spark plugs are provided in your motorcycle.

Remove the spark plug cap from the spark plug.

Remove spark plug using the plug spanner and
tommy bar.

Clean the insulator tip and electrodes of the plug
carefully.

Check and set the electrode gap between 0.80 to
0.90 mm.

Refit the spark plug on the cylinder head and refit
the spark plug cap on the spark plug.

Make sure the spark plug / Spark plug cap & HT
cables are proper fitment.
 Check and remove stone, splinters, nails or other
particles embedded in the tyre treads.
 Periodically inspect wheels for spokes breakage
and wheel rim run out.

Check proper seating of the tyre beading on the
rim whenever the tyre is reassembled.

Use only recommended tyres & tubes, inflated to
correct air pressure.