Royal Enfield Bullet 350 2019, Owner'S Manual, Page: 28 / 68

26

Turn the ignition switch
to ‘OFF’ position.
To stop the motorcycle, close throttle,
apply front and rear brakes.
Simultaneously, shift gears into
neutral just before the motorcycle
comes to a complete stop.
GEAR SHIFTING, RIDING & STOPPING
NOTE
 Prior to starting, check to see if
the low fuel indicator is glowing
continuously.

Low fuel indication will glow
continuously, if the fuel level in
tank is below 4+0.5 Lts (approx).

Release the Starter button as soon as the Engine starts.
 If Engine does not start, wait for 30 seconds before
pressing the starter switch.
 A Clutch switch is provided in the system for the safety
of the rider. When the motorcycle is in gear, the
motorcycle cannot be started. To start in gear
depress the clutch lever and press Starter button to
start engine.

Warm up engine for 2 minutes.

Depress clutch lever.

Press gear pedal with toe to
engage 1
st
gear.

Gently open throttle and release
clutch lever simultaneously. If
clutch is released suddenly, the
engine may stall and cause the
motorcycle to move with a jerk.

To shift to 2
nd
and higher gears
close throttle, depress clutch lever
and press the gear pedal with heel.