Roxell Titan, User Manual

Page: 7 / 18

ROXELL - 0819
Titan-
User's guide -
EU
4
GENERAL SAFETY RULES
Winching system for feeding and drinking lines
Carefully read the following instructions before
USING
the system
- Before you do any repair or maintenance works, always disconnect the
electricity supply.
- Ensure you wear personal protection equipment (gloves, dust masks).
- The system starts automatically .
Never use your hands at dangerous locations (feed intake boots, drive units, control units
or outlet holes in the tubes) before you have completely switched off the transport system
and made sure that nobody can switch it on without your knowledge.
- Never allow unauthorized persons to enter the house in your absence.
- Be careful when lowering or winching up the feeding lines/circuits:
- Stop immediately at the slightest hitch.
- Never stay underneath when lowering or winching up the lines/circuit.
- If the auger stalls: immediately switch off the system.
Carefully read the Troubleshooting Guide and strictly follow instructions.
Contact a technically trained person .
An auger under tension can cause very serious injuries when released.
- Regularly check the elbow/trough and/or tube connections . Tighten if necessary.
- Regularly check that the control unit (pan) and/or the motor handy box are properly closed.
- Ensure that the hopper cover grill or cover on the 100 kg hopper closes properly .
- The standard winching system is only suitable for height regulation during the flock's
stay and winching up for cleaning (1x per flock).
For more frequent winching, use the daily winching components.
IMPORTANT
This SYMBOL will be used to draw your attention to matters that are
of GREAT IMPORTANCE for your SAFETY .
It means: WARNING - follow the safety instructions.
Disconnect the current, re-read the safety rules.
In short: BE ALERT . IGNORING these instructions can cause
SERIOUS INJURIES or even DEATH .
DANGER
Titan Nr: 004...
Automatic pan feeding system for rearing and production of turkeys