ROXELL - 0819
Titan -
User's guide -
EU
9
Hopper 1 is empty
while the feed
level in the second
hopper
corresponds with the
position of the level
switch.
Birds massively move to one side of
the house, i.e. depending upon the
position of the sun.
The problem occurs sporadically:
You can solve the problem by changing the
round hole in the Flex-Auger tube above
hopper 1 into a rectangular one. Install two
outlet drops above hopper 1 (see fig. 3.) if
necessary, so that more feed drops into
hopper 1. Install the level switch low in hopper
2 (see fig. 2.). Install and adjust drop tubes to
all hoppers high enough.
The problem occurs regularly:
Install a level switch high in each hopper.
Install the level switch low in the last hopper.
Install and adjust the drop tube high, so that
the feed in tube A (over switch level) is carried
to hopper 2.
Feed level in the
pans is too high/low.
Feed level setting is not correct.
Mounted in the wrong position.
Adjust the feed level with the adjustment knob. If
the maximum/minimum level is reached, mount the
cone in the high or low position.
The cone drops out. Adjustment knob is set in mounting
position.
Remount the cone. Make sure that the adjustment
knob is not set in the mounting position.
Drop tube installed and
adjusted high.
Level switch installed
low.
Hopper 1
Hopper 2
FIGURE 1.
FIGURE 2.
A
Hopper 2
Case a.
Large feed reserve (A) in
case b.
Hopper 1
FIGURE 3.
Summary of Contents for Titan
Page 1: ...0819 00404214 EN ENGLISH User s Guide Original User s Guide ...
Page 17: ......
