Roxell Titan User Manual Download Page 16

 

 

 

EG-verklaring van overeenstemming

 

(Richtlijn 2006/42/EG, Bijlage II.1.A)

 

EC-declaration of conformity

 

(Directive 2006/42/EC, Annex II.1.A) 

 

Fabrikant/Manufacturer:  
Roxell, Industrielaan 13, 9990 Maldegem 
Tel: +32 50 72 91 72 
Fax: +32 50 71 67 21 
 
Verklaart geheel onder eigen verantwoordelijkheid dat het product: 
Declares on its own responsibility that the product: 

 

Winching system      Nr: 00102368 / 00102087  
Liersysteem voor voer- en drinklijnen; manueel en gemotoriseerd 
Winching system for feed- and drink lines; manual and motorised 
Nummer CE-label/number CE-label :______________________________________________ 
 
Waarop deze verklaring betrekking heeft, in overeenstemming is met:  
-

 

de volgende richtlijnen: 2006/42/EG (Machinerichtlijn); 2014/30/EU (Elektromagnetische 

Compatibiliteit). 

-

 

de geharmoniseerde Europese Normen: EN ISO 13857; EN 349:1993 + A1:2008; EN ISO 
12100:2010; gemotoriseerd: EN 60204-1:2006; EN 61439-1:2011; EN 61439-2:2011  

-

 

 

-

 

De EG-verklaring van overeenstemming / inbouwverklaring betreft uitsluitend de machine of niet 

voltooide machine in de toestand waarin zij op de markt is gebracht, met uitsluiting van de later 
door bijvoorbeeld  de verdeler en/of installateur en/of eindgebruiker toegevoegde componenten 
en/of verrichte bewerkingen. 

                                                          (NL) 

 

Relating to this declaration is in accordance with 
-

 

The following directives 2006/42/EC (Machinery Directive); 2014/30/EU (Electromagnetic 

Compatibility). 

-

 

The harmonised European standards: EN ISO 13857:2008; EN 349:1993 + A1:2008; EN 
ISO 12100:2010; motorised: EN 60204-1:2006; EN 61439-1:2011; EN 61439-2:2011

 

 

The EC-declaration of conformity / declaration of incorporation relates exclusively to the machinery 
or partly completed machine in the state in which it was placed on the market and excludes 
components which are added and/or operations carried out thereafter for instance by the distributor 
and/or the installer and/or the final user.

  

                                                        

(EN) 

 

Plaats, Datum / Place, Date : Maldegem, 01/01/2019 

 

 

……………………………….. 
Dhr. Gino Van Landuyt 
Managing Director 

 

00105502

SPECIMEN

Summary of Contents for Titan



















Reviews: