Roxell HaiKoo, Use And Assembly Manual

Page: 61 / 90

ROXELL - 009 - 3509 HAIKOO -- INSTALLATION INSTRUCTIONS
III--11
CENTRAL WINCH INSTALLATION
IMPORTANT : INSTALL WINCH ABOUT IN THE MIDDLE, AT THE FIRST FIXATION IN
THE DIRECTION OF THE 100KG HOPPER*, NOT AT THE END OF A LINE ! MAXIMUM LIFTING
POWER : 800KGS.
THE TRACTION OF THE WINCH IS 800 KG. INSTALL THE WINCH AT A SOLID SPOT IN THE ROOF
CONSTRUCTION. REINFORCE WHEN NECESSARY.
FIGURE 19.
Roxell supplies the hand operated winch without
mounting plate and bolts/nuts.
Fix the winch directly to a SOLID CEILING.
If you want to use a mounting plate : see drawing.
You can install plate & winch in any direction.
= HAND OPERATED CENTRAL WINCH.
CORRECT
Fix the winch to the plate with bolts and locknuts.
Fix this plate to the ceilings before the insulation. Pay attention to the correct direction.
FIGURE 20.
= CENTRAL WINCH W/GEARBOX (MOTOR OPERATED), supplied
with MOUNTING PLATE.
Install the motor after finishing the installation.
Winching up speed :
1 m/minute.
WRONG