© 2021 Rowley
®
Company. All rights reserved. R-TEC Automation
®
is a registered trademark of the Rowley
®
Company, LLC.
15
OPTION B. Attaching Solar Panel via Velcro Strip to a Window or surface
Stickers
Protective Film
Dual Lock
i. Clean solar panel front surface with alcohol wipe. Allow surface to dry.
ii. Peel protective film off one side of Dual Lock and attach to one end of solar panel. Press adhesive tape firmly onto solar
panel surface for 5 seconds to ensure good adhesion. Ensure that Dual Lock does NOT cover any portion of the solar
panel cells. Repeat previous steps for attaching adhesive tape to other end of solar panel.
iii. Apply stickers onto the solar panel to seal unused mounting holes.
iv. Clean the window or surface with alcohol wipe. Allow surface to dry.
Peel protective film off Dual Locks. Press firmly onto fixing surface.
Apply hand pressure for 5 seconds and check if firmly attached.
Any partial or total covering of any solar panel cell will degrade solar panel performance.
IMPORTANT
