© 2021 Rowley
®
Company. All rights reserved. R-TEC Automation
®
is a registered trademark of the Rowley
®
Company, LLC.
14
INSTALLATION PROCESS
Fully charge the Motor or Battery Pack before beginning Solar Panel installation.
IMPORTANT
Ensure solar panel has adequate exposure to sunlight. When selecting a position for solar panel, consider any external
obstructions like trees, building, signs, etc. that may limit the amount of sun light reaching onto the solar panel.
IMPORTANT
The PV panel supports two motor voltages; however a single PV panel can only charge one motor type at a time. That
is, if the 12V port is connected to a 12V motor, the USB (5V) port is switched off. Conversely If the 12V port is NOT
connected, the USB port is automatically switched on.
IMPORTANT
OPTION A. Attaching Mounting Bracket to Window Frame
Locate the optimal position for solar panel in window.
Ensure all components are available for installation scenario.
Possible Orientations
Top Fix
Side Fix
Stickers
Screw
i. Break off excess bracket length using Pliers (if required).
ii. Install mounting bracket to wall/mounting point.
iii. Fix Solar panel to mounting bracket using screw.
iv. Apply stickers onto the Solar Panel to seal unused mounting holes.
