Rowenta BRUSH ACTIV 1000 CF9250D0, Instructions For Use Manual

Page: 59 / 116

BLOW DRYING
Layered and tapered
This blow drying technique suits hair of all lengths.
After washing your hair, dry it well in a towel and carefully untangle it.
Pre-dry your hair using the drying function of the Brush Activ’ with your head tipped forwards to give
body at the roots. The tips must remain damp.
You can use a mousse or wax to enhance the appearance of your hair.
Separate the hair vertically in two parts from the top of your head down to the nape.
Start blow drying, placing the appliance under the section in a root -> tip movement.
Repeat the operation until both sides of the nape are perfectly dry.
Continue with the sections at the side of the face and finish at the top of the head.
To obtain perfect layering, place the brush under or on the section in the direction of the
layering and pull the section towards the opposite cheek, keeping the head slightly tilted.
Working the tips:
To keep the tips tapered, do not pull on the section when the brush reaches the tip; remove the brush gently
so as not to spoil the effect.
Allow the hair to cool before finishing.
For a more marked effect towards the tips, the small-diameter brush is ideal!
Tips turned under:
Place the brush (small or large diameter) under the tip of the section. Start the
rotation to roll the hair under.
Tips turned outwards:
Place the brush (small or large diameter) on the tip of the section.
Start the rotation to roll the hair outwards.
For a more marked effect towards the tips, the small-diameter brush is ideal! You
can give this movement to all your hair or to just a few sections.
EN
CF9250_1800123013_A5 18/05/11 11:03 Page59