Rowe GrandSTAR, Service Manual

Page: 62 / 120

LED Lighting and Bill Acceptor Grand STAR Internet Jukebox
5-6 22022603
3. Depress the button on the bottom of the Bill Acceptor to release the Lower Housing from the
assembly as shown in Figure 5-6. Slide the Lower Housing out of the frame.
Figure 5-6 Removing the Lower Housing
4. Referring now to the LED’s on the Inlet Bezel, the ‘Page’ LED will now be blinking a single-flash
pattern. Figure 5-7 shows the 5 LEDs and their meanings.
Figure 5-7 Configuration Settings
The ‘ON’ and ‘OFF’ settings shown are the Rowe default settings
5. Press the Service Mode Button and release to step through the Bill Acceptance options. When
you have the bills enabled as desired, press the Service Mode Button and hold it until the Page
LED begins to blink in a 2-flash pattern.
6. Set the Page 2 options as desired by pressing the Service Mode Button and releasing to step
through the options. When you finish these settings, press the Service Mode Button and hold it
until the Page LED begins to blink in a 3-flash pattern.