Rowe GrandSTAR, Service Manual

Page: 24 / 120

Installing Hard Drive & Testing Grand STAR Internet Jukebox
2-4 22022603
6. Rotate the housing into position and hook it into the slots on the Core Computer
cover. Slide the Hard Drive Clamp over the spring-loaded screw and secure the
clamp in place by tightening the Thumbscrew. Carefully dress the Hard Drives
IDE and Power Cable. Refer to
Figure 2-4 .
Figure 2-4 - Hard Drive Installed
7. Plug the power cord back into the ATX Power Supply.
8. Locate the jukebox power cord packed inside the cash bag.
9. Route the power cord out through the access hole in the back panel of the cabinet
and plug the other end of the power cord into the Power input of the surge
suppressor located on the inside right cabinet back panel.
10. Plug the AC cord into a standard grounded wall outlet.
11. Place the ON/OFF switch on the Surge Suppressor in the ON position. The
computer will automatically begin to boot up.
NOTE: This process may take a few minutes.
NOTE: The Core Computer has two LED indicators, a GREEN power indicator (lit when
power is present at the Core Computer) and a RED hard drive activity indicator (lit when the
hard drive is in operation). Refer to
Figure 2-4.
GREEN LED
RED LED
POWER CORD
HARD DRIVE
CLAMP
ATX POWER SUPPLY IDE CABLE
HARD DRIVE
POWER CABLE
THUMBSCREW