background image

180 Kehoe Blvd. • Carol Stream, Illinois 60188

Telephone (630) 784-1000 • FAX (630) 784-1650

Toll Free 1-877-392-7854 (in the U.S.A. and Canada)

www.ajantunes.com

LIMITED WARRANTY

Equipment manufactured by Roundup Food Equipment Division of A.J. Antunes & Co. has been constructed of the finest 

materials available and manufactured to high quality standards.  These units are warranted to be free from mechanical 

and electrical defects for a period of one year from date of purchase or 18 months from shipment from factory, whichever 

occurs first, under normal use and service, and when installed in accordance with manufacturer’s recommendations.  

To insure continued proper operation of the units, follow the maintenance procedure outlined in the Owner’s Manual.

1. This  warranty  does  not  cover  cost  of  installation,  defects  caused  by  improper  storage  or  handling  prior  to  placing  of  the 

Equipment.  This warranty does not include overtime charges or work done by unauthorized service agencies or personnel.  

This warranty does not cover normal maintenance, calibration, or regular adjustments as specified in operating and mainte-

nance instructions of this manual, and/or labor involved in moving adjacent objects to gain access to the Equipment.  This 

warranty does not cover consumable items such as platen release sheet and conveyor belt wraps.  

This warranty does not 

pay travel, mileage, or any other charges for an authorized service agency to reach the equipment location.

2. Roundup reserves the right to make changes in design or add any improvements on any product.  The right is always reserved 

to modify equipment because of factors beyond our control and government regulations.  Changes to update equipment do 

not constitute a warranty charge.

3. If shipment is damaged in transit, the purchaser should make a claim directly upon the carrier.  Careful inspection should be made 

of the shipment as soon as it arrives and visible damage should be noted upon the carrier’s receipt.  Damage should be reported to 

the carrier.  This damage is not covered under this warranty.

4. Warranty charges do not include freight or foreign, excise, municipal or other sales or use taxes.  All such freight and taxes 

are the responsibility of the purchaser.  

5. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING 

ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EACH OF WHICH IS 

HEREBY EXPRESSLY DISCLAIMED.  THE REMEDIES DESCRIBED ABOVE ARE EXCLUSIVE AND IN NO EVENT SHALL 

ROUNDUP BE LIABLE FOR SPECIAL CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR THE BREACH OR DELAY IN 

PERFORMANCE OF THIS WARRANTY.

Summary of Contents for HDC-20






















Reviews: