Rottler SG10A, Operation And Maintenance Manual

Page: 6 / 124

Section 1 Introduction SG10A Manual
www.rottlermfg.com
1-2
officers, employees or agents shall not be liable in any manner whatsoever to any person for any loss,
damage, injury, liability, cost or expense of any nature, including without limitation incidental, special,
direct or consequential damages arising out of or in connection with the use of the Manual.
Description
The model SG10A machine is an automatic precision, Seat finish machine design to maintain accuracy
on every finish seat. It can be equipped with tooling and accessories to handle most American, Import,
and Diesel passenger car and truck cylinder heads. Convenient controls, easy cylinder Head Clamping,
air floated spindle base (Work Head) centering on the pilot shank and clamping, means considerable
savings in floor to floor time, and operator involvement. Making this machine highly suited to the jobber
shop where accuracy and dependability is required.
Disclaimer
The SG10A Manual (henceforth to be referred to as the “Manual”) is proprietary to Rottler Manufacturing
LLC. (“Rottler Manufacturing”) and no ownership rights are hereby transferred. No part of the Manual
shall be used, reproduced, translated, converted, adapted, stored in a retrieval system, communicated or
transmitted by any means, for any commercial purpose, including without limitation, sale, resale, license,
rental or lease, without the prior express written consent of Rottler Manufacturing.
Rottler Manufacturing does not make any representations, warranties or guarantees, express or implied,
as to the accuracy or completeness of the Manual. Users must be aware that updates and amendments
will be made from time to time to the Manual. It is the user’s responsibility to determine whether there
have been any such updates or amendments. Neither Rottler Manufacturing nor any of its directors,
officers, employees or agents shall not be liable in any manner whatsoever to any person for any loss,
damage, injury, liability, cost or expense of any nature, including without limitation incidental, special,
direct or consequential damages arising out of or in connection with the use of the Manual.
Rottler Manufacturing and its employees or representatives are not responsible for any information
regarding final specifications of any workpiece that is created as a final product when using Rottler
equipment. It is the responsibility of the end user of Rottler equipment to determine the final dimensions
and finishes of the workpiece that they are working on. Any information regarding final dimensions and
finishes that appears in any Rottler literature or that is expressed by anyone representing Rottler is to
be regarded as general information to help with the demonstration of or for operator training of Rottler
equipment.
Limited Warranty
Rottler Manufacturing Company Model SG10A parts and equipment is warranted as to materials and
workmanship. This limited warranty remains in effect for one year from the date of delivery, provided the
machine is owned and operated by the original purchaser and is operated and maintained as per the
instructions in the manual.
Tools proven to be defective within the warranty period will be repaired or replaced at the factory’s option.
The products are warranted upon delivery to conform to their published specifications and to be free from
defects in material and workmanship under normal use for a period of one year from shipment. Should a
product not be as warranted, Rottler sole obligation shall be, at its option, to repair, correct or replace the
product or to refund the amounts paid for the Product upon its return to a location designated by Rottler.
No warranty shall extend to rapid wear Products (including tooling) or to Products which have been
subject to misuse (including any use contrary to Rottler instructions), neglect, accident (including during