Rottler SG10A, Operation And Maintenance Manual

Page: 26 / 124

Section 3 Safety SG10A Manual
www.rottlermfg.com
3-3
SAFETY DECALS SHOULD NEVER BE REMOVED . They are there to convey important safety
information and warn of potential hazards.
ALL LOCAL SAFETY CODES AND REGULATIONS should be followed when installing this machine.
ONLY QUALIFIED PERSONAL should perform service on the electrical and control systems.
When boring the machine is capable of throwing metal chips over 10- feet from the cutting area. Always
use the guards. Eye protection must be worn at all times by the operator and all other personnel in the
area of the machine.
No list of safety guidelines can be complete. Every piece of shop environment
is different. Always consider safety first, as it applies to your individual working
conditions. Use this and other machinery with caution and respect. Failure to follow guidelines could
result in serious personal injury, damage to equipment or poor work results.
Electrical Power
THIS MACHINE IS AUTOMATICALLY CONTROLLED AND MAY START AT ANYTIME
All electrical power should be removed from the machine before opening the rear electrical enclosure.