Rotronic RMS Wall mount Data Logger Instruction Manual Download Page 3

Page: 3 / 35

RMS-LOG Wireless / LAN Data Loggers

E-M-RMS-LOG-V1.4.docx

Instruction Manual



ROTRONIC AG



Bassersdorf



Switzerland

Page 3 of 35

Scope:

This manual is valid for the RMS data logger from firmware version V1.x. The low-order digit of the manual is

updated with each new release.

Overview

1.1 RMS System Overview

The Rotronic Monitoring System (RMS) is a network comprising various devices and the RMS server software.

The software is the heart of the system. It collects all measured data of the devices and saves it in the database.

The individual devices work as input modules (data loggers) and as output modules (displays, analog outputs,

switched outputs). The user can view the system data at any time on a PC, laptop or smart phone.

Figure 1: Schematic diagram of the RMS with the server software and database at the heart

Summary of Contents for RMS Wall mount Data Logger




































Search results

Summary of Contents for RMS Wall mount Data Logger

Reviews:

Related manuals for RMS Wall mount Data Logger

Brands by name

Popular brands

Rotronic RMS Wall mount Data Logger, Instruction Manual

Search results

Summary of Contents for RMS Wall mount Data Logger

Reviews:

Related manuals for RMS Wall mount Data Logger

Brands by name

Popular brands