RMS-LOG Wireless / LAN Data Loggers
E-M-RMS-LOG-V1.4.docx
Instruction Manual
© 2018
ROTRONIC AG
Bassersdorf
Switzerland
Page 9 of 35
Pairing
Trigger
Action
LED
1s press
Confirms pairing
1 x orange, the LED blinks
orange for each channel
searched
Gateway found
n x orange, the LED flashes
orange when the pairing
demand is open
Confirmed pairing
3 x green
Issue pairing (time out, no data
received)
3 x red
Remove pairing
Trigger
Action
LED
8s press
Removes pairing, stops
logging and turns off device
3 x red, the pairing information
stored in the logger is deleted
Device status update
Trigger
Action
LED
1s press
Shows the current status
Green
shows
the
ISM
connection (see below)
1 x red, battery low
2 x red, there is no connection
to the server
Automatic (every 5 seconds)
Shows the current status
1 x green, the connection to the
server is good
2 x red, there is no connection
to the server
Wireless range
Trigger
Action
LED
1s press
Shows the current wireless
status
4 x green, RSSI >-30dBm
3 x green, RSSI >-60dBm
2 x green, RSSI >-80dBm
1 x green, RSSI <=-80dBm
1.10 Interface
The logger is operated completely via the LAN or wireless interface.
1.11 MODBUS communication protocol
For direct connection to other systems, the device provides a MODBUS TCP server. To following data is
available via MODBUS communication:
