ROTORCOMP EVO15, Operating Manual

Page: 5 / 36

Operating Manual -
EVO ®
Line
[en] 07/2020 1.1
1 Foreword
1.1 General
This manual contains information and regulations
for the installation and operation of the screw com-
pressor air ends EVO2, EVO3, EVO3-G, EVO6,
EVO6-G, EVO9, EVO9-G, EVO15, EVO15-G,
EVO28, EVO28-G, EVO42 and EVO42-G.
1.2 Scope
This documentation is applicable for screw com-
pressor air ends of the models EVO2, EVO3,
EVO3-G, EVO6, EVO6-G, EVO9, EVO9-G,
EVO15, EVO15-G, EVO28, EVO28-G, EVO42
and EVO42-G from delivery date.
1.3 Change service
This document is not subject to the change ser-
vice.
1.4 Abbreviations
bar (g) Operating pressure
(relative pressure in bar)
Bh Operating hours
DHV Minimum pressure valve
RC ROTORCOMP
SIV Safety valve
Min. minimum
Max. maximum
V DC Direct voltage
V AC Alternating voltage
1.5 Manufacturer's information
1.5.1 General information
This operating manual provides information on the
operating principles, installation, operation and
maintenance of the screw compressor air ends.
Read this operating manual carefully before com-
missioning the screw compressor air ends for the
first time in order to ensure proper handling, oper-
ation and maintenance from the outset.
Please observe all warnings and safety instruc-
tions.
ROTORCOMP screw compressor air ends are
carefully checked and tested prior to shipping.
When your merchandise arrives, the delivery
scope must be checked for completeness and
possible damage. Any missing parts and/or trans-
port damage must be reported immediately.
A damaged screw compressor air end must not be
put into operation under any circumstances.
Always have the operating manual available for
the operating personnel and make sure that oper-
ation and maintenance are carried out according
to the instructions.
All instructions contained in this operating manual
must be observed in the specified manner and
sequence in order to prevent injuries and damage
to the system.
The screw compressor air ends has been built
according to the latest technology and the recog-
nized safety rules.
Danger may nevertheless result for the user or
others or for the screw compressor air end system
during its use.
Any use other than described in the chapter
"Purpose" is considered improper.
ROTORCOMP shall not be liable for any damage
or injuries resulting from such improper use.
We shall not provide any guarantee whatsoever
for malfunctions and damage resulting from failure
to comply with the operating manual.
The manufacturer reserves the right to carry out
further technical developments without prior
notice.
Always specify the model and the complete serial
number from the nameplate in all correspondence.
ROTORCOMP shall assume no liability whatso-
ever for damage or injuries which occur during
handling, operation, maintenance work or repairs
due to a failure to comply with the safety instruc-
tions to proceed with the usual care and caution,
even if this is not expressly mentioned in this oper-
ating manual.