ROTORCOMP EVO15, Operating Manual

Page: 21 / 36

Operating Manual -
EVO ®
Line
[en] 07/2020 7.1
7 Maintenance
7.1 Safety precautions
The owner must ensure that all maintenance,
assembly and repair work is carried out by autho-
rized, qualified, specially trained personnel, which
has informed itself sufficiently in advance by
studying the operating manual in detail. Following
commissioning, the owner bears al responsibility
and liability for equipment and assembly.
Maintenance must be performed on the motor, oil
cooler, intake filter, fine oil separator and the other
components in accordance with the manufac-
turer's specifications.
– Only use permissible or suitable tools for main-
tenance and repair work.
– Only use genuine spare parts.
– All maintenance and repair work must only be
carried out with the machines shut down and
the power supply switched off. In the process,
the machine must be secured against acciden-
tal switch-on.
– Before removing pressurized parts, the unit
must be effectively cut off from all pressure
sources and a pressure relief of the entire sys-
tem must be carried out.
– Never use flammable solvents or carbon tetra-
chloride to clean parts. Take precautions
against toxic vapors or cleaning agents.
– Always ensure absolute cleanliness during
maintenance and when conducting repair work.
Keep dirt away from the system. Cover parts
and exposed openings with a clean cloth, paper
or strips of adhesive tape.
– Do not carry out welding work or any other work
requiring or producing heat near the oil system.
– Make sure that no tools, loose parts or cleaning
cloths are left behind in or on the system.
– Before releasing the unit for operation following
maintenance or overhauling, check whether
the operating pressures, temperatures, time
settings and the oil level are correct, and
whether the control and switch-off devices
function properly.
– Electrical components, control devices, etc.
must be protected against the penetration of
moisture, e.g. from a steam jet.
Warning:
During all maintenance work:
ACCIDENT DANGER!
Danger of being jammed in the screws.
Note:
All maintenance work conducted must be entered
immediately in the check sheet.