65
en
12 Basic settings
In the Basic settings menu, all basic parameters for the controller can be adjust-
ed. Normally, these settings have been made during commissioning. They can be
subsequently changed in this menu.
Basic settings
Adjustment
channel
Description
Adjustment range / selection
Factory
setting
Language
Selection of the menu language Deutsch, English, Français, Español,
Italiano, Nederlands, Türkçe,
České
, Polski, Portugues, Hrvatski,
Română, Български, Русский
,
Suomi, Svenska, Magyar
Deutsch
Auto DST
Daylight savings time selection Yes, No
Yes
Date
Adjustment of the current date 01.01.2001 … 31.12.2099
01.01.2010
Time
Adjustment of the current time 00:00 … 23:59
-
Temp. Unit Temperature unit
°C, °F
°C
Vol. unit
Volume unit
Gallons, Liter
Liter
Press. unit
Pressure unit
psi, bar
bar
Energy unit Energy unit
Wh, BTU
Wh
Reset
back to factory settings
Yes, No
No
Scheme
Scheme selection
-
000
13 SD card
The controller is equipped with an SD card slot for SD memory cards.
With an SD card, the following functions can be carried out:
• Logging measurement and balance values. After the transfer to a computer, the
values can be opened and visualised, e. g. in a spreadsheet.
• Store adjustments and parameterisations on the SD card and, if necessary, re-
trieve them from there.
• Running fi rmware updates on the controller.
Firmware updates
When an SD card with a fi rmware update is inserted, the enquiry Update? is indi-
cated on the display. The setting can be changed between Yes and No by pressing
buttons
❷
and
❹
.
Î
To run the update, select Yes and confi rm by pressing button
➄
.
The update is run automatically. The indication Please wait and a progress bar
appear on the display. When the update has been completed, the controller will
automatically reboot and run a short initialisation phase.
Note:
Only remove the card when the initialisation phase has been completed
and the main menu is indicated on the controller display!
Î
To skip the update, select No.
The controller commences normal operation.
Note:
The controller will only recognise a fi rmware update fi le if it is stored in
a folder named RESoL on the fi rst level of the SD card.
Î
Create a folder named RESoL on the SD card and extract the
downloaded ZIP fi le into this folder.
Starting the logging
Î
Insert the SD card into the slot.
Î
Adjust the desired logging type and interval.
Logging will start immediately.
Completing the logging process
Î
Select the menu item Remove card…
Î
After Remove card is displayed, remove the card from the slot.
When Linear is adjusted in the Logging type adjustment channel, data logging
will stop if the capacity limit is reached. The message Card full will be displayed.
If Cyclic is adjusted, the oldest data logged onto the SD card will be overwritten
as soon as the capacity limit is reached.
Summary of Contents for BW/H Komfort HE
Page 79: ...79 en...
