Rotenso V26V, Instruction Manual

Page: 101 / 156

69
User manual
Room air conditioner - VERSU X
EN
PART 5. REMOTE CONTROL SUPPORT
4. BUTTONS AND FUNCTIONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control.
The following is a brief introduction to the remote control itself. For instructions on how to operate your air
conditioner, refer to the How to Use Basic Functions section of this manual.
1. ON/OFF
Button to turn on and turn off the air conditioner.
2. TEMP
Increases temperate in 1°C (1°F) increments. Max. temperature is
30°C (86°F).
Note:
Press together & buttons at the same time for 3 seconds
will alternate the temperature display between the °C & °F.
3. SET
Scrolls through operation functions as follows:
Follow Me ( )
AP mode ( ) Follow Me ( ) ...
The selected symbol will flash on the display area, press OK
button to confirm.
4. TEMP
Decreases temperature in 1°C (1°F) increments. Min. temperature
is 16°C (60°F).
5. FAN SPEED
Selects fan speeds in the following order:
AUTO
LOW MED HIGH
Note:
Holding this button down for 2 seconds will activate Silence
feature.
6. SWING
Starts and stops the horizontal louver movement. Hold down for
2 seconds to initiate vertical louver auto swing feature.
7. MODE
Scrolls through operation modes as follows: AUTO
COOL
DRY
HEAT FAN
Note : HEAT mode is not supported by the cooling only appliance.
8. SLEEP
Saves energy during sleeping hours.
9. OK
Used to confirm the selected functions.
10. TIMER
Set timer to turn unit ON or OFF
11. FRESH
Used to start/stop the Fresh feature.
8
7
1
2
3
10
9
4
5
6
11
12
ANZU
13
14