Rotenso V26V, Instruction Manual

Page: 116 / 156

84
User manual
Room air conditioner - VERSU X
EN
4. Time indication
Normally, LCD displays the current time of the setting clock. When press this Button last for 4 sec. the clock
will flash at the frequency of 0.5 sec. By using and to set the minute. Release the button when finish the
clock setting, the time will stop flashing automatically, which means time setting successfully.
5. Time OFF indication
During setting the Timing OFF or after set the Timing OFF, the LCD would display “TIME OFF”.
6. Fan speed indication
Press SPEED to display the current wind speed. AUTO, LOW, MED and HIGH can be elected. The default state
is high fan speed for the unit without medium fan speed.
8. OPERATION INSTRUCTIONS
8.1. AUTO operation
Switch on the power and running indicator light on indoor unit flashes.
1. Press MODE to select AUTO.
2. Adjust temp via and . Generally the range is 17°C~30°C.
3. Press ON/OFF and running indicator light on indoor unit is lightened. Air conditioner will work on AUTO
mode and fan speed is AUTO which is non adjustable. Press the ON/OFF button again to stop the unit
operation.
NOTE
In the AUTO mode, the air conditioner can logically choose the mode of COOL, FAN by sensing the difference
between the actual ambient room temperature and the set temperature on the remote controller. If the AUTO
mode is not comfortable for you , the desired mode can be selected manually.
8.2. COOL/HEAT/FAN operation
1. Press MODE to select COOL, HEAT or FAN.
2. Adjust temp via and . Generally the range is 17°C~30°C.
3. Press FAN SPEED to select AUTO, LOW, MED or HIGH.
4. Press ON/OFF and running indicator light on indoor unit is lightened. Air conditioner will work on the set
mode. Stop operation via ON/OFF.
Note:
The FAN mode cannot be used to control the temperature. While in this mode, only steps 1, 3 and 4 may
be performed.
8.3. DRY operation
1. Push the MODE button to select DRY.
2. Push the TEMP button to set the desired temperature from 17°C~30°C.
3. Push the ON/OFF button. The operation lamp lights and the air conditioner starts to operate in the DRY
mode. Push the ON/OFF button again to stop this unit operation.
Note:
Due to the difference of the set temperature of the unit and the actual indoor temperature, the Air
Conditioner when in DRY mode will automatically operate many times without running the COOL and FAN
mode.
PART 6. ZATO WIRED CONTROLLER SUPPORT