63
User manual
Portable air conditioner - ORTA X
EN
REMOTE CONTROL SUPPORT
4. BUTTONS AND FUNCTIONS
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control.
The following is a brief introduction to the remote control itself. For instructions on how to operate your air
conditioner, refer to the How to Use Basic Functions section of this manual.
1. ON/OFF
Button to turn on and turn off the air conditioner.
2. TEMP
Increases temperate in 1°C (1°F) increments. Max. temperature is
30°C (86°F).
3. SET
Scrolls through operation functions as follows:
Fresh ( ) AP mode ( ) Fresh ( ) ...
The selected symbol will flash on the display area, press OK
button to confirm.
4. TEMP
Decreases temperature in 1°C (1°F) increments. Min. temperature
is 17°C (60°F).
5. FAN SPEED
Selects fan speeds in the following order:
AUTO LOW MED HIGH
Note:
Holding this button down for 2 seconds will activate Silence
feature (some units).
6. TIMER ON
Sets timer to turn unit ON.
7. MODE
Scrolls through operation modes as follows: AUTO COOL
DRY HEAT FAN
Note
:
HEAT mode is not supported by the cooling only appliance.
8. SHORTCUT
Used to restore the current settings or resume previous settings.
9. OK
Used to confirm the selected functions.
10. SWING
Starts and stops the horizontal louver movement. Hold down for 2
seconds to initiate vertical louver auto swing feature(some units).
11. TIMER OFF
Set timer to turn unit OFF.
12. I SENSE (Smart Follow function)
Temperature sensing and room temperature display button.
8
7
1
2
3
10
9
4
5
6
11
12
PAKO
13
15
14
