50
User manual
Portable air conditioner - ORTA X
EN
Make sure the hook of the adaptor is aligned
with the hole seat of the air outlet.
Hook
Hole Seat
Lower groove
adaptor
Make sure the adaptor is
inserted into the lower
groove of the air outlet.
Window slider A
Window slider B
Window slider A
Window slider B
Window slider C
Bolts
PART 2. INSTALLATION
Part
Description
Qty
Part
Description
Qty
Screw and anchor *
(only for wall installation)
4 pc
Drain Hose Adaptor(only for
heat pump mode)
1 pc
Window Slider A *
1 pc
Foam Seal A (Adhesive)*
2 pc
Foam Seal B (Adhesive) *
1 pc
Remote Controller
and Battery
1 set
Foam Seal C (Non-adhesive) *
1 pc
* Optional items. are optional. Slight variations in design may occur.
3. WINDOW INSTALLATION KIT
Fig. 5
Fig. 6
OR
Fig.7
NOTE
Once the Exhaust Hose assembly and Adjustable Window Sliderare prepared, choose from one of the
following installation methods.
1. STEP ONE - Preparing the Exhaust Hose assembly
Press the exhaust hose into the window slider adaptor
and unit adaptor, clamp automatically by elastic
buckles of the adaptors.
2. STEP TWO - Install the Exhaust hose assembly to
the unit
Insert unit adaptor of the Exhaust hose assembly into
the lower groove of the air outlet of the unit while the
hook of the adaptor is aligned with the hole seat of the
air outlet and slide down the Exhaust hose assembly
along the arrow direction for installation.
3. STEP THREE - Preparing the Adjustable Window
Slider
• Depending on the size of your window, adjust the
size of the window slider.
• If the length of the window requires two window
sliders, use the bolt to fasten the window sliders
once they are adjusted to the proper length.
• For some models, if the length of the window
requires three window sliders (optional), use two
bolts to fasten the window sliders once they are
adjusted to proper length.
Window slider A
Window slider B
Window slider A
Window slider B
Window slider C
Bolts
Unit adaptor
Window slider
adaptor
Exhaust hose
Press into
Press into
Exhaust hose
assembly
