56
User manual
Portable air conditioner - ORTA X
EN
PART 4. OPERATIONS AND FUNCTIONS
• Do not put the duct to window when you can’t set the humidity level (portable without humidity sensor).
You can set the humidity level when the unit has humidity sensor. Please put the back duct for best
dehumidification effect, but the duct doesn’t need to connect to window.
4. AUTO operation
• When you set the air conditioner in AUTO mode, it will automatically select cooling, or fan only operation
depending on what temperature you have selected and the room temperature.
• The air conditioner will control room temperature automatically round the temperature point set by you.
• Under AUTO mode, you can not select the fan speed.
NOTE
: Under AUTO mode, both the AUTO mode and the actual operation mode indicator lights illuminate for
some models.
5. FAN operation
• Press the MODE button until the FAN indicator light comes on.
• Press the FAN SPEED”button to choose the fan speed. The temperature can not be adjusted.
• Do not put the duct to window.
6. TIMER operation
• When the unit is on, press the Timer button will initiate the Auto-off stop program, the TIMER OFF indicator
light illuminates. Press the UP or down button to select the desired time. Press the TIMER button again
within 5 seconds, the Auto-on start program is initiated. And the TIMER ON indicator light illuminates.
Press the up or down button to select the desired Auto-on start time.
• When the unit is off, press the Timer button to initiate the Auto-on start program, press it again within five
seconds will initiate the Auto-off stop program.
• Press or hold the UP or DOWN button to change the Auto time by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24 hours. The control will count down the time remaining until start.
• The system will automatically revert back to display the previous temperature setting if there is no
operation in a 5 seconds period.
• Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0 will cancel the Auto Start/Stop
timer program.
• When the malfunctionoccurs, the Auto Start/Stop timed program will also be cancelled.
7. SLEEP/ECO operation
Press this button, the selected temperature will increase (cooling) or decrease(heating) by 1°C/2°F(or 1°F)
30 minutes. The temperature will then increase (cooling) or decrease (heating) by another 1°C/2°F(or 1°F)
after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the
originally selected temperature. This ends the SLEEP/ECO mode and the unit will continue to operate as
originally programmed. NOTE: This feature is unavailabe under FAN or DRY mode.
3. OTHER FEATURES
1. FOLLOW ME/TEMP SENSING feature(optional)
NOTE
: This feature can be activated from the remote control ONLY. The remote control serves as a remote thermo-
stat allowing for the precise temperature control at its location.
To activate the FOLLOW ME/TEMP SENSING feature, point the remote control towards the unit and press
the FOLLOW ME/TEMP SENSING button. The remote control will send this signal to the air conditioner until
press the FOLLOW ME/TEMP SENSING button again. If the unit does not receive the FOLLOW ME/TEMP
SENSING signal during any 7 minutes interval, the unit will exit the FOLLOW ME/TEMP SENSING mode.
