GIRU W - Portable air conditioner
29
User manual
PART 7. HANDLING HANDLING REMOTE CONTROL
Current
time 1PM
2PM
3PM
4PM
5PM
6PM
7PM
8PM
9PM
Timer starts
Unit turns
ON
Unit turns
OFF
6 hours later
8 hours later
3. ADVANCED FUNCTIONS
1. SLEEP Function
The SLEEP function is used to decrease energy use while you sleep (and don t need the same temperature settings
to stay comfortable).
NOTE
: The SLEEP function is not available in FAN or DRY mode.
2. SWING Function
Used to stop or start louver movement and set the desired up/down air flow direction. The louver changes 6
degrees in angle for each press (some models without). If keep pushing more than 2 seconds, the louver auto
swing feature is activated.
3. FOLLOW ME function
The FOLLOW ME function enables the remote control to measure the temperature at its current location. When
using AUTO, COOL, or HEAT functions, measuring ambient temperature from the remote control (instead of from
the indoor unit itself) will enable the air conditioner to optimize the temperature around you and ensure maximum
comfort.
1. Press FOLLOW ME button to activate function. The remote control will send temperature signal to the unit
every three minutes.
2. Press FOLLOW ME button again to turn off this function.
4. SHORTCUT function
• Used to restore the current settings or resume previous settings.
• Push this button when remote controller is on, the system will automatically revert back to the previous settings
including operating mode, setting temperature, fan speed level and sleep feature (if activated).
• If pushing more than 2 seconds, the system will automatically restore the current operation settings including
operating mode, setting temperature, fan speed level and sleep feature(if activated ).
NOTE
• All the functions described are accomplished by the unit, if the unit has no this feature, there is no corresponding
operation happened when press the relative button on the remote controller.
• The graphics are for reference only. They may vary slightly.
