GIRU W - Portable air conditioner
22
User manual
Please check the machine according to the following form before asking for maintenance.
Problem
Description
Solution
Unit does not turn on
when pressing ON/OFF
button
P1 Error Code
The Water Collection Tray is full. Turn off the
unit, drain the water from the Water Collection
Tray and restart the unit.
In COOL mode: room temperature is
lower than the set temperature
Reset the temperature
Unit does not cool
well
The air filter is blocked with dust or
animal hair
Turn off the unit and clean the filter according
to instructions
Exhaust hose is not connected or is
blocked
Turn off the unit, disconnect the hose, check
for blockage and reconnect the hose
The unit is low on refrigerant
Call a service technician to inspect the unit and
top off refrigerant
Temperature setting is too high
Decrease the set temperature
The windows and doors in the room
are open
Make sure all windows and doors are closed
The room area is too large
Double-check the cooling area
There are heat sources
inside the room
Remove the heat sources if possible
The unit is noisy and
vibrates too much
The ground is not level
Place the unit on a flat, level surface
The air filter is blocked with dust or
animal hair
Turn off the unit and clean the filter according
to instructions
The unit makes a
gurgling sound
This sound is caused by the flow of
refrigerant inside the unit
This is normal
