Gebrauchsanweisung ○ Mode d’emploi ○ Istruzioni per l’uso ○ Instruction for use
•
ASSEMBLY OF ADAPTER
1.
Insert conveyor (L) into housing (C).
2.
Put on knife (M) with cutting edges towards the outside.
3.
Put selected perforated disk (N/K/J) over the knife.
4.
Screw on the locking ring (O).
5.
Put the now assembled mincer on the motor shaft of the motor unit, diagonally
from the right and turn it to the left until it clicks in (Dismantling: press button (D)
and turn out the mincer to the right).
6.
Put on loading bowl (B).
7.
The mincer is now ready for use: switch on the motor and fill in meat or vegetables.
Press down lightly with the food feeder (A) while processing.
8.
Should the conveyor (L) get blocked during use, press the reversal button (G).
•
SAUSAGE SPOUT
o
This accessory allows you to make your own sausages. Please proceed as follows:
1.
Insert conveyor (L) into housing (C)
2.
Put spacer (P) on conveyor (L).
3.
Before fixing the locking ring (O), insert the sausage spout (Q) through the nut
with the small side towards the outside.
4.
Then screw the locking ring (O) with the spout (Q) into the mincer and fasten
slightly.
5.
To fill a sausage, the skin has to be immersed in water for about 15 minutes and
then put over the spout.
•
CLEANING
o
Always unplug, before cleaning the appliance.
o
All parts may be washed normally. Do not use steel wool pads or other abrasive
material.
o
Do never immerse the motor unit into water; wipe it with a damp cloth only.
o
The knife and the perforated disks of the meat mincer are not stainless. It is
recommended to grease these parts with cooking oil or fat after washing!
•
DISPOSAL
o
For proper disposal, the unit is to return to the dealer, the service agent or the
company Rotel AG.
