Gebrauchsanweisung ○ Mode d’emploi ○ Istruzioni per l’uso ○ Instructions for use
60
o
In this mode, the appliance will regulate the speed according to the temperature of
the food inside the bowl:
o
If the bowl temperature stays below 60°C
- The speed can be selected from 1 to 8.
- Press and hold the “pulse” - button for the appliance to run up to speed 8.
Release the pulse button to switch back to the selected speed.
- While the appliance is running under speed 1 to 7, the “pulse” button will
repeatedly increase the speed of the appliance to speed 8.
o
If the bowl temperature exceeds 60°C
- The speed is limited at speed 1. Regardless of the speed selection that was
initially done, the appliance switch automatically to speed 1. Any speed se-
lecting function is now invalid.
- Once the temperature inside the bowl decreases under 60°C, rotate the
knob back to the “OFF” – position to select another running speed.
Mode 2: heating mode
o
Fill up the stainless-steel bowl, fit it
onto the base (1), assemble the bowl
cover (2), push up on the head-lift lev-
er and at the same time lower the
mixer head with its cover (3).
o
Plug in the appliance and rotate the
knob to the “Off” - position, otherwise,
the LCD indicator light will keep flash-
ing.
o
Press the “Rapid heating button” (9)
for the appliance to start heating up
the food to 100
℃
, and keep the tem-
perature constant at 70
℃
. The blue
indicator light is on. If the “Rapid heat-
ing button” is pressed again, the appli-
ance will stop heating.
o
For a manual setting, press the “Temperature
⇌
Time” - button (F) to set a working
time (from 1 minute to 3 hours). The LCD indicator light will stop flashing after 3 se-
conds. If no time is set, the time counter runs (1.2.3.4…) and the appliance will stop
automatically working after 3 hours.
o
Set the required temperature to heat the food (from 20
℃
to 140
℃
). The LCD indica-
tor light will stop flashing 3 seconds after the temperature setting.
o
Start the appliance by pushing the “Rapid heating button” (9).
