background image

www.roswellmarine.com

6.5x5.25” Classic Vamp Spin Speaker Installation Instr

u

ctions

W

elcome to the 

f

amil

y

.

FEATURES

• Premium sandblasted and anodized, aluminum 

finish.

• Speaker Spin Technology allows the 5.25” speaker 

to spin 180 Degrees.

• Custom designed speaker grills.

• Integrated white LED's back-light the cone to 

create your desired visual atmosphere.

• Machined Billet Roswell 3” clamp with 1.90”, 

2.375”, and 3.00” adapters.

F

E

B

D

C

A

Description

Dimension

(Overall Width)

15.891” / 403mm

10.768” / 274mm

3.000” / 76mm

2.122” / 54mm

10.623” / 270mm

(Outboard Extension)

(Clamp Width)

(Inboard Extension)

(Drop from Tube Center)

12.550” / 319mm

(Overall Height)

2

Roswell’s Classic Vamp Spin speakers are back and better than ever. We took our famous spin speaker and 

re-worked it, featuring updated grills and LED lighting, as well as improving the surface finishes on the housings to 

help the speakers hold up even better in a marine environment. We paired our 6510 speaker with it's 5010 

counterpart, wired in parallel and connected with our patented Spin Speaker technology, allowing you to rotate 

the outer speaker a full 180º through 11 different positions. Integrated white LED lighting in the speakers add a 

special touch to make your experience on the water even more exciting.

We are fully committed to going past industry expectations every day to make your boating experience more 

enjoyable. With the input of our dealers, team riders, and boaters around the world, our goal remains to redefine 

the marine industry day in and day out. We will not be confined to our desks; we are out on the water testing our 

full line of products to ensure your days on the water are as hassle-free and enjoyable as possible. 

The all-new Vamp Spin is simply the latest iteration of that commitment. Thanks again for choosing Roswell and 

keep an eye out for  more dominating technology throughout the season.

If you have any questions about your speakers or questions regarding installation, please contact your authorized 

Roswell dealer. If you have further questions, please don’t hesitate to contact us directly at (321)-638-1331 or by 

emailing [email protected].

Summary of Contents for Classic Vamp Spin Speakers







Reviews: