6.5x5.25” Classic Vamp Spin Speaker Installation Instr
u
ctions
www.roswellmarine.com
5
F
Remove the 2 screws from each clamp and insert
the appropriate plastic insert for your tube size.
Note: If your tubing is a size not included in the package please
contact Roswell for other inserts. Available sizes: 2.85”, 2.50“ and
2.25”
H
Mount the speakers to the tower. Apply some red
threadlock to the screws. Tigthen to 25ft-lbs. If
necessary rotate your speaker at the clamp to
whatever angle you like and then tighten the 4 set
screws.
Note: This step is easier with two people!
THREADLOCKER
3/16”
5/16”
THREADLOCKER
5/16”
THREADLOCKER
Torque bolts
to 25ft-lb
x2
G
Remove the 4 set screws that hold each clamp to
the speaker. Add a drop of red Loctite into each set
screw hole and reinsert the set screws into the
holes enough to hold the clamp but still loose
enough to be able to adjust the angle.
x4
I
Wrap the safety lanyard cable around the tube the
speaker is mounted to. Thread one end of the
lanyard through one loop.
J
Mount the safety lanyard to the speaker and add the
set screw to the clamp top to lock the speaker into
place. Use the long set screw for 2.375” and 1.90”
tubes. Use the short set screw for 3.00” tubes.
Note: Double check clearance before adding the
set screw!
K
Connect your wiring harnesses to your speaker.
Push the connectors in until you hear a click.
3/16”
3/16”
THREADLOCKER
THREADLOCKER
Tighten all four
set screws
x8
x2
x2
THREADLOCKER
