Installation and Wiring
MD-W11 Installation Manual
21
Rx – Receiving transmission
ENRL – Enrolling
TRBL – Trouble
SYS – System OK
3.10
Installer Recommendations
To install the MD-W11 units most efficiently, place the Near and Far
Units facing each other, rather than placing them at a 90º angle to
one another.
Both transmission and reception are improved if the Near and Far
Units have the same polarity.
In addition:
Do not place any of the MD-W11 units next to an air conditioner,
heater, blower, or an engine that generates a magnetic field.
Do not place any unit next to an electronic device that transmits
RF or next to an access control reader or device.
Assure that metal fixtures and furnishings (such as doors or
closets) are not in line with the Near and Far Units.
Assure that the Near and Far Units are at the same approximate
height, preferably above head level.