Installation and Wiring
18
MD-W11 Installation Manual
3.5
Installing the MD-W11F Unit
The Far Unit can be connected to a standard Rosslare reader, such as
the AY-K12. The optional battery box can then be attached to the
wall next to the Far Unit.
To install the Far Unit:
1.
Attach the battery box to the wall with two screws.
2.
Insert the wires from the reader and from the battery to the hole
in the side of the Far Unit box.
3.
Attach the side of the unit box to the wall with four screws.
4.
Attach the wires to the PCB.
5.
Cover both the battery and the Far Unit boxes.
6.
Tighten the screws on the bottom of both boxes so that they
remain closed.
7.
Wire the unit as instructed in Section
3.6.
