manualshive.com logo in svg

Rosslare InteliDoor AC-Q41H, Instruction Manual

Share
Download
Rosslare InteliDoor AC-Q41H Instruction Manual Download Page 9

Page 16

07/04

AC-Q41H

07/04

Page 17

AC-Q41H

Changing the Modes of Operation

Changing from Normal Mode to Secure Mode:

The default factory setting for the Normal / Secure Code is 3838

1)

 Enter the 4-digit Normal / Secure 

Code

l

 Mode LED will flash red

2)

 Press the 

"#"

 key to confirm

the Mode change.

l

 Mode LED is red

Changing from Secure Mode to Normal Mode:

The default factory setting for the Normal / Secure Code 3838

1)

 Enter the 4-digit Normal / Secure 

Code.

l

 Mode LED will flash green.

2)

 Press the 

"#"

 key to confirm

the Mode change.

l

 Mode LED will turn green.

The Auxiliary Input  of the AC-Q41H can also be used to switch the 
mode of operation from Secure to Normal Mode  and vice versa.  
Refer to "Setting the Auxiliary Mode" on Page 28.

Mode

Door

GREEN

Mode

Door

RED

Mode

Door

RED

Mode

Door

Mode

Door

Mode

Door

RED

GREEN

GREEN

Modes of Operation

=

A Secure User must enter their Primary and Secondary Codes to 
gain entry. After entering their Primary code the Door LED will 
flash green for 10 seconds, during which the Secondary Code 
must be entered.  A Master User only needs to enter their PIN 
code once to gain entry.

The AC-Q41H has 3 Modes of Operation:

1) Normal Mode

. 

 Mode LED is green

Normal Mode is the default mode. In Normal Mode the door is 
locked until a Primary Code is presented to the controller. The 
controller can only be programmed in Normal Mode. 

2) Bypass Mode.

 

l

 Mode LED is orange

In Bypass Mode, access to the premises is dependent on 
whether the controller's Lock Strike Relay is programmed for Fail 
Safe Operation or Fail Secure Operation.

When the Lock Strike Relay is programmed for 
Fail Secure Operation, the door is locked until the star 
button is pressed.

When the Lock Strike Relay is programmed for 
Fail Safe Operation, the door is constantly unlocked.

In case of power failure, for security reasons when power is 
restored the controller will be in Normal Mode.

3) Secure Mode.

 

l

 Mode LED is red

Only Secure and Master Users can access the premises during 
the Secured Mode.

  

Mode

Door

GREEN

Mode

Door

ORANGE

Mode

Door

RED

Summary of Contents for InteliDoor AC-Q41H


























Reviews:

No comments

Brands by name

Popular brands

Load more brands