manualshive.com logo in svg

Rosslare InteliDoor AC-Q41H, Instruction Manual

Share
Download
Rosslare InteliDoor AC-Q41H Instruction Manual Download Page 12

Page 22

07/04

AC-Q41H

Page 23

07/04

AC-Q41H

Changing the Open Code

Changing the Auxiliary Code

The Open Code is mainly used as a method to quickly test the 
Lock Strike Relay during installation.

The Default Factory Setting for the Open Code is 2580.
When the first user is added to the controller, the default Open 
Code will automatically be deleted, ready for a new Open Code  
to be re-entered.

1)

 Enter Programming Mode

2)

 Press

 "1" 

to enter 

Menu 1

l

 The Mode LED will turn red

3)

 Enter the new 4-digit code you

wish to set as Open Code.

4)

System returns to Normal Mode

l

 You will hear three beeps

l

 The Door LED will turn off

l

 The Mode LED will turn green

Note:

- Open Code does not function in Secure Mode.
- Wrong entries: you will hear a long beep and the 

controller  will return to Normal Mode.

- Code 0000 will erase and deactivate the Open Code.

The Auxiliary Code is mainly used as a method to quickly test the 
Auxiliary Relay during installation. The Default Factory Setting for 
the Auxiliary Code is 0852.

For security reasons when the first user is added to the controller 
or the open code is changed, the default Auxiliary Code will 
automatically be deleted, ready for an  Auxiliary Code to be 
assigned.

Mode

Door

GREEN

Mode

Door

GREEN

RED

?

?

?

?

Mode

Door

GREEN

Entering Programming Mode

Exiting Programming Mode

1)

 Press the 

"#" 

key two times

within 2 seconds.

l

 Mode LED will turn off

l

 Door LED will turn red

2)

 Enter your 4-digit Programming

Code.

If the Programming Code
is valid the door LED will turn
green and the AC-Q41H will be in
Programming Mode.

Note:

- The AC-Q41H must be in Normal Mode to enter the

Programming Mode.

- The factory default  Programming Code is 1234
- If a Programming Code is not entered within 5 seconds, 

The AC-Q41H will return to Normal Mode.

1)

To exit the Programming Mode at any time:

Press the 

"#" 

key.

l

 You will hear 1 long beep

l

 The Door LED will be off

l

 The Mode LED will turn green

This indicates that the AC-Q41H has returned to Normal Mode.

2)

Wrong entries may reset the controller back to Normal Mode.

3)

While in Programming Mode if no key is pressed for 1 minute the 
AC-Q41H will exit programming mode and return to Normal 
Mode.

4)

 While in enrolling users, deleting users, or code assignment 

modes, to exit Programming Mode press the "#" key two times.

Mode

Door

Mode

Door

GREEN

RED

1

2

3

4

Mode

Door

GREEN

Summary of Contents for InteliDoor AC-Q41H


























Reviews:

No comments

Brands by name

Popular brands

Load more brands