Ross Ultricool, User Manual

Page: 21 / 36

Ultricool User Guide (v1.0) Configuration • 21
Accessing the Ultricool Interfaces in DashBoard
The interface is accessed by expanding the Ultricool node in the DashBoard Tree View and selecting the sub-node.
The interface is divided vertically to show status and frame information on the left, and configuration options on the
right.
To access the Ultricool interfaces in DashBoard
1. Locate the Ultricool in the Tree View of DashBoard.
2. Expand the Ultricool node to display the frame in the Tree View.
3. Double-click the Ultricool sub-node to display its interface in the right-side of the DashBoard window.
4. Select a tab to displays its contents in the DashBoard window.
In the example below, the Product and Setup tabs are selected.
For More Information on...
• the Status tabs, refer to the section “ Monitoring via DashBoard ” on page 28.
Configuring the Fan Mode
The Fan Mode sets the speed of all fans to a specific rate, or whether the fans will run at a speed as determined by
the connected Ultrix router.
For More Information on...
• the physical fan locations, refer to the section “ Rear Panel Overview ” on page 14.
• establishing communications between an Ultrix router and the Ultricool, refer to the chapter “ Connecting to an
Ultrix ” on page 23.
To specify a fan mode
1. Display the Ultricool interface in DashBoard as outlined in the procedure “ To access the Ultricool interfaces
in DashBoard ” on page 21.
2. Select the Setup tab.