Ross Ultricool, User Manual

Page: 20 / 36

20 • Configuration Ultricool User Guide (v1.0)

After initial setup, you can edit the network settings of the Ultricool using the Network tab options in
DashBoard.
Adding the Ultricool to the Tree View in DashBoard
Once you have assigned the Ultricool a static IP Address, you can then manually add it to the Tree View. Manually
adding the Ultricool displays its node in the Tree View, granting you access to the interfaces described used to
monitor the status of the power supplies.
To manually add the Ultricool to the Tree View in DashBoard
1. In the Basic Tree View toolbar of DashBoard, click .
The Select Equipment or Service Type to Add dialog opens.
2. Expand the openGear/DashBoard Connect node.
3. Select TCP/IP DashBoard Connect or openGear Device .
4. Click
Next >
.
The TCP/IP DashBoard Connect/openGear Device dialog opens.
5. Select the OGP radio button as the Protocol .
6. Enter the IP Address for the Ultricool in the IP Address field that you assigned in the section “ To assign a
static IP address to the Ultricool ” on page 19.
7. In the text fields provided, enter the display name for the Ultricool.
8. Click
Finish
.
The Ultricool displays in the Tree View .