Ultricool User Guide (v1.0)
Configuration • 19
Configuration
The DashBoard client software enables you to configure and monitor the Ultricool. Using the tabs provided via the
DashBoard client software, you can:
• Configure the network settings for your Ultricool
• Monitor the status of each fan
This chapter outlines how to assign an IP address to the Ultricool, and access the interfaces and status fields
displayed in the Ultricool DashBoard interface.
Launching DashBoard
DashBoard must be run on a computer that has a physical wired ethernet connection. Wireless connections do not
allow device discovery.
For More Information on...
• downloading and installing the DashBoard client software, refer to the
DashBoard User Manual
.
To launch DashBoard
1. Ensure that you are running DashBoard software version 8.5 or higher.
2. Launch DashBoard by double-clicking its icon on your computer desktop.
Using Walkabout to Assign the IP Address to the Ultricool
Once the Ultricool is physically installed and cabled to your facility network, you will need to assign it a static IP
Address to enable DashBoard to locate it on your network. Establishing an IP Address enables DashBoard to
communicate with the Ultricool and update the Basic Tree View with the Ultricool nodes.
The default IP Address of the Ultricool is 192.168.20.125.
To assign a static IP address to the Ultricool
1. Launch DashBoard.
2. From the DashBoard client main toolbar, select
File
>
Show Walkabout
.
The DashBoard window displays the
Walkabout
table.
3. Click
Refresh
, located at the bottom of the Walkabout tab, to ensure the list in the Walkabout interface is
current.
4. In the
Walkabout
table, find the entry for the Ultricool you want to configure.
5. Use the
Name
field to assign a unique identifier to the Ultricool. This will be the name displayed in the Tree
View of DashBoard.
After you edit a cell in the
Walkabout
table, the
Connection/Link Quality
value for the device reports
1%
. It is
recommended to wait approximately 1 minute, then click
Refresh
to apply the new settings.
6. Use the
Address
field to specify the IP Address supplied by your IT Department for this device.
7. Ensure the
Netmask
field is set to match your network requirements.
8. Use the
Gateway
field to specify the IP Address for connection outside of the local area network (LAN).
Press
Enter
on your keyboard after editing each field.
9. Click
Reboot
in the row of the
Walkabout
table for the Ultricool.
Summary of Contents for Ultricool
