background image

OGX-FR Series User Guide (v1.0)

Using DashBoard • 27

The interface for the Network Controller Card displays in the DashBoard window.

In the following example, the interface for an MFC-OG3-N displays.

3. Select the 

Network

 tab.

4. Enter a new name for the OGX-FR frame in the 

Frame Name

 field.

5. Press 

Enter

.

6. Click 

Apply

.

Removing an OGX-FR Frame from the Tree View in DashBoard

This section outlines how to remove an OGX-FR frame from a Tree View in DashBoard. Once a frame is removed, 
DashBoard no longer reports the status in the Tree View and you are no longer able to monitor or control the 
affected devices. If communication with a frame is disconnected via the Disconnect option, the status indicator is 
light gray until the frame is re-connected. If the status indicator is dark gray, with the rest of the node displaying as 
normal, a connection cannot currently be established to the device.

If the OGX-FR frame you are removing is in a Custom Folder, you must first delete the frame from the Custom 
Folder before it can be removed from the Tree View.

To remove an OGX-FR frame from the Tree View

1. Right-click the OGX-FR frame you wish to remove.

2. Select 

 to remove the OGX-FR frame from the Tree View.

To disconnect an OGX-FR frame from the Tree View

1. Toggle 

 to off.

2. Right-click the OGX-FR frame status indicator.

3. Select 

 or toggle 

 to on.

Summary of Contents for OG3-FR Series









































Reviews: