Ross HDC-8223, User Manual

Page: 26 / 72

3–2 • User Controls HDC-8223 User Manual (Iss. 01)
Control and Monitoring Features
This section describes the HDC-8223 card-edge status LEDs and display. These LEDs and the
display show status and error conditions relating to the card itself and remote (network)
communications (where applicable). Because these LEDs are part of the card itself and require no
external interface, the LEDs are particularly useful in the event of communications problems with
external devices such as network remote control devices. Refer to
Figure 3.1 for the location of
the LEDs.
Figure 3.1 HDC-8223 Card-edge Controls
Status LEDs
Table 3.1 provides basic LED descriptions.
Table 3.1 LEDs on the HDC-8223
LED Color Display and Description
COM
Flashing Blue
When flashing, this LED indicates that the HDC-8223 is
receiving control message from DashBoard.
REF
Blue
When lit, this LED indicates that the HDC-8223 is receiving
valid reference.
ERR
Red When lit, this LED indicates an internal error.
SDI IN #
Blue
Three blue LEDs for each SDI input (A and B) indicate the input
signal raster format being received and locked onto by the
HDC-8223 (LOCK, HD, SD).
Continuous cycling of the LEDs indicates the HDC-8223 has not
locked onto a particular format (as in the case of no signal input).
Flashing Blue
When flashing, this LED indicates that the HDC-8223 is
receiving a signal which cannot be processed
4-Character Display
COM LED
REF LED
ERR LED
HD LED
SD LED
LOCK LED
SDI IN A
HD LED
SD LED
LOCK LED
SDI IN B