Ross HDC-8223, User Manual

Page: 53 / 72

HDC-8223 User Manual (Iss. 01) DashBoard Menus • 5–13
Reticules Tabs
This section summarizes the options in the Reticules sub-tabs.
Basic Tab
The Basic tab allows Safe Action and/or Safe Title overlays and other static markers to be added
to the output video image. Table 5.12 summarizes the options in the Basic sub-tab.
Table 5.12 Reticules — Basic Tab Items
Tab Title Item Parameters Description
Basic
SDI Out Reticule
Disable
Insertion of all reticules or other markers
is disabled
Enable
Provides independent master
enable/disable for card SDI outputs.
Any combination of reticules or other
markers described below can be inserted.
Analog Out Reticule
Disable
Insertion of all reticules or other markers
is disabled
Enable
Provides independent master
enable/disable for card CVBS outputs.
Any combination of reticules or other
markers described below can be inserted.
Reticule Size
(locked)
Custom
Safe Action Area control is customized
using the options in this tab
SAA
Disable
Disables safe action area graticule
insertion
Enable
Enables safe action area graticule
insertion
SAA Height 0-100
Controls height of insertion; percentage of
4:3 outputted image area
SAA Width 0-100
Controls width of insertion; percentage of
4:3 outputted image area
STA
Disable Disables Safe Title area graticule insertion
Enable Enables Safe Title area graticule insertion
STA Height 0-100
Controls height of insertion; percentage of
4:3 outputted image area
STA Width 0-100
Controls width of insertion; percentage of
4:3 outputted image area
Overlay Color
White Selects white overlay color
Black Selects black overlay color
Inverse Color
Disable Provides a negative of the underlying
image pixels. Note that Inverse setting
overrides Overlay Color setting.
Enable
Opacity 0-100
Sets the opacity of the overlay for both
white/black and inverse color modes.