Ross DRA-8604, User Manual

Page: 35 / 44

DRA-8604 User Manual (Iss. 02) DashBoard Menus • 4–5
Setup Tab
Table 4.4 summarizes the Setup options available in8320AR-302 DashBoard.
Table 4.4 Setup Menu Items
Menu Title Item Parameters Description
Channel Options
Single Channel (1x16)
a
a. This option only available when using the 8320AR-302 Full Rear Module.
Configures the card to operate as a single
channel with 16 outputs
Dual Channel (2x8)
a
Configures the card to operate as a dual channel
with 8 outputs per channel
Single Channel (1x8)
b
b. This option only available when using the 8320AR-300 Full Rear Module.
Configures the card to operate as a single
channel with 8 outputs
Dual Channel (2x4)
b
Configures the card to operate as a dual channel
with 4 outputs per channel
Channel #
c
c. If the fields are labeled as Channel A-1 and Channel A-2, the Channel Options menu is set to Single Channel.
Input BNC
# (read-only)
Indicates the BNC on the rear module that is
assigned as the input source for the specified
channel
N/C
Indicates that no BNCs are currently used as
inputs for the channel
Output BNCs
# (read-only)
Indicates the BNC on the rear module that are
assigned as the outputs for the specified channel
N/C Indicates that there are no outputs in this channel
Enable Failover
Selected
The specified channel will use the backup input
when the primary input of the channel is lost.
The backup input signal must be stable for 3
seconds. Note that the card returns to the primary
input once the primary input signal is stable for 3
seconds.
Cleared* Disables this feature
Enable Equalizer
Selected* Equalizer is always enabled
Cleared Sets the equalizer in bypass mode
Enable Reclocker
Selected* Reclocker is always enabled
Cleared Sets the reclocker in bypass mode
Reclocker Rate
Auto*
Card automatically detects the incoming data
rate and reclocks at that rate
270Mbps Reclocker is set to 270Mbps
1.5/3.0Gbps Reclocker is set to 1.5Gbps and 3Gbps
Edit Permissions
Unlocked* All configurable menu options are editable
Locked
All configurable menu options, except this one,
are locked and are read-only
Factory Defaults Reset
Resets all editable parameters to the factory
default values