DRA-8604 User Manual (Iss. 02)
Installation • 2–7
Software Upgrades
The DRA-8604 can be upgraded in the field via the Network Controller Card in your openGear
frame. Note that DashBoard version 5.1.0 or higher is required for this procedure.
To upgrade the software on a card
1.
Contact Ross Technical Support for the latest software version file.
2.
Display the
Device View
of the card by double-clicking its status indicator in the
Basic
Tree View
.
3.
From the
Device View
, click
Upload
to display the
Select file for upload
dialog.
4.
Navigate to the
*.bin
upload file you wish to upload.
5.
Click
Open
.
6.
If you are upgrading a single card, click
Finish
to display the
Uploading to Selected
Devices
dialog. Proceed to step 8.
7.
If you are upgrading multiple cards:
• Click
Next >
to display the
Select Destination
menu. This menu provides a list of
the compatible cards based on the card selected in step 2.
• Specify the card(s) to upload the file to by selecting the check box(es) for the cards
you wish to upload the file to.
• Verify that the card(s) you wish to upload the file to. The
Error/Warning
fields
indicate any errors, such as incompatible software or card type mismatch.
• Click
Finish
to display the
Uploading to Selected Devices
dialog.
8.
Monitor the upgrade.
• The
Uploading to Selected Devices
dialog enables you to monitor the upgrade
process.
• Click
OK
to complete the upgrade.
• The card(s) are temporarily taken offline during the re-boot process. The process is
complete once the status indicators for the
Card State
and
Connection
fields return
to their previous status.
Summary of Contents for DRA-8604
