An automatic GPI output trigger can be overridden if
required.
Note:
The Next Button Secondary Function must be set to
GPO to be able to trigger a GPI output manually using the NEXT
button.
Keep the following in mind when working with GPI
output triggers:
•
The
RlClip
knob must be set to
On
to trigger a
GPI output with a transition.
•
Edge triggered GPI outputs remain triggered for
the configured duration.
•
Level triggered GPI outputs toggle between high
and low each time they are triggered.
To Manually Trigger a GPI Output
The GPI must already be set up as a output and the Next
button functionality must be set to GPO before you can
manually trigger it.
1.
Press and hold the
NEXT
button.
While holding the Next button, the
mnemonic/pattern buttons light for each GPI
output that is currently triggered.
2.
Press the mnemonic/pattern button for the GPI
output you want to trigger. The number of the
GPI is shown on the mnemonics of the buttons.
The numbers on the pattern buttons on the
C10/C1 correspond to the GPI.
To Override a GPI Output
The RlClip personality option must be set to User for
you to override GPI output triggering.
1.
Prepare the transition as required, but do not
perform the transition.
2.
Press the transition type button again to bring up
the transition menus.
3.
Use the
RlClip
knob to select whether the GPI
output is triggered (
On
), or is not triggered (
Off
).
Carbonite Operation Manual (v10.1) — Transitions •
29
