Canada
This Class “ A ” digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe “ A ” est
conforme a la norme NMB-003 du Canada.
Europe
This equipment is in compliance with the essential
requirements and other relevant provisions of
CE
Directive 93/68/EEC
.
International
This equipment has been tested to
CISPR 22:1997
along with amendments
A1:2000
and
A2:2002
, and
found to comply with the limits for a Class A Digital
device.
Important:
This is a Class A product. In domestic
environments, this product may cause radio
interference, in which case the user may have to
take adequate measures.
General Handling Guidelines
• Careful handling, using proper ESD precautions,
must be observed.
• Power down the system before PCB removal.
A Word About Static Discharge
Throughout the many procedures in this manual, please
observe all static discharge precautions.
CAUTION:
Avoid handling the switcher circuit
boards in high static environments such as
carpeted areas, and when synthetic fiber clothing
is worn. Touch the frame to dissipate static
charge before removing boards from the frame,
and exercise proper grounding precautions
when working on circuit boards. Exercise proper
grounding precautions when working on circuit
boards.
Warranty and Repair Policy
Ross Video Limited (Ross) warrants its switchers
and related options, to be free from defects under
normal use and service for a period of ONE YEAR
from the date of shipment. Fader handle assemblies
are warranted for the life of the product. If an item
becomes defective within the warranty period Ross
will repair or replace the defective item, as determined
solely by Ross.
Warranty repairs will be conducted at Ross, with all
shipping FOB Ross dock. If repairs are conducted
at the customer site, reasonable out-of-pocket
charges will apply. At the discretion of Ross, and
on a temporary loan basis, plug in circuit boards
or other replacement parts may be supplied free of
charge while defective items undergo repair. Return
packing, shipping, and special handling costs are the
responsibility of the customer.
Software upgrades for switchers may occur from
time to time, and are determined by Ross Video. The
upgrades are posted on the Ross Video website, and are
free of charge for the life of the switcher.
This warranty is void if products are subjected to
misuse, neglect, accident, improper installation or
application, or unauthorized modification.
In no event shall Ross Video Limited be liable for
direct, indirect, special, incidental, or consequential
damages (including loss of profit). Implied warranties,
including that of merchantability and fitness for a
particular purpose, are expressly limited to the duration
of this warranty.
This warranty is TRANSFERABLE to subsequent
owners, subject to Ross Video's notification of change
of ownership.
Environmental Information
Waste Electrical and Electronic Equipment
Directive (WEEE Directive)
The equipment that you purchased required the
extraction and use of natural resources for its
production. It may contain hazardous substances
that could impact health and the environment.
To avoid the potential release of those substances
into the environment and to diminish the need for the
extraction of natural resources, Ross Video encourages
you to use the appropriate take-back systems. These
systems will reuse or recycle most of the materials
from your end-of-life equipment in an environmentally
friendly and health conscious manner.
The crossed-out wheeled bin symbol invites you to use
these systems.
If you need more information on the collection, reuse,
and recycling systems, please contact your local or
regional waste administration.
You can also contact Ross Video for more information
on the environmental performances of our products.
Carbonite Black Setup Manual (v14.0) — Document Information •
v
