manualshive.com logo in svg

Ross Carbonite Black, Setup Manual

Share
Download
Ross Carbonite Black Setup Manual Download Page 2

Thank You For Choosing

Ross

You've made a great choice. We expect you will be

very happy with your purchase of Ross Technology.
Our mission is to:

1.

Provide a Superior Customer Experience
• offer the best product quality and support

2.

Make Cool Practical Technology
• develop great products that customers love

Ross has become well known for the Ross Video Code

of Ethics. It guides our interactions and empowers our

employees. I hope you enjoy reading it below.
If anything at all with your Ross experience does not

live up to your expectations be sure to reach out to us

at 

[email protected]

.

David Ross
CEO, Ross Video

[email protected]

Ross Video Code of Ethics

Any company is the sum total of the people that make

things happen. At Ross, our employees are a special

group. Our employees truly care about doing a great

job and delivering a high quality customer experience

every day. This code of ethics hangs on the wall of all

Ross Video locations to guide our behavior:

1.

We will always act in our customers' best interest.

2.

We will do our best to understand our customers'

requirements.

3.

We will not ship crap.

4.

We will be great to work with.

5.

We will do something extra for our customers, as

an apology, when something big goes wrong and

it's our fault.

6.

We will keep our promises.

7.

We will treat the competition with respect.

8.

We will cooperate with and help other friendly

companies.

9.

We will go above and beyond in times of crisis.

If there's no one to authorize the required action

in times of company or customer crisis - do what

you know in your heart is right.

 (

You may rent

helicopters if necessary.

)

ii

 • Thank You For Choosing Ross — Carbonite Black Setup Manual (v14.0)

Summary of Contents for Carbonite Black

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands