Ross AirCleaner-2, User Manual, Page: 5 / 47

International
This equipment has been tested to CISPR 32:2015 along with amendment AMD1:2019 and found to
comply with the limits for a Class A Digital device.
Important: This is a Class A product. In domestic environments, this product may cause radio interference, in which case the
user may have to take adequate measures.
Important - Modifications & Shielded Cables
Changes or modifications to this product not authorized by Ross ® Video Limited could void the FCC
Compliance and negate authority to operate the product.
This product was tested for FCC compliance under conditions that included the use of Ross
® Abekas ®
peripheral devices and Ross ® Abekas ® shielded cables and connectors between system components. It
is important that Ross ® Abekas ® peripheral devices are used, and shielded cables and connectors are
used between system components to reduce the possibility of causing interference to radios, television
sets, and other electronic devices. Ross ® Abekas ® peripheral devices and the properly shielded cables
and connectors can be obtained directly from Ross ® Abekas ® , or through a Ross ® Abekas ® -authorized
dealer.
Safety and First Aid
Ross
®
Abekas
®
equipment is designed to the highest standards of quality and reliability. However, no
matter how these systems are designed, operators and maintenance personnel can be exposed to electrical
shock hazard when protective covers are removed for maintenance or the installation of options. With
this caution in mind, each operator and engineer must observe all safety regulations, and have a clear
understanding of first aid procedures related to electrical hazards.
Safety and Compliance Certifications
• Certified to EN-55032, IEC/EN 61000-3-1, IEC/EN 61000-3-2, and IEC/EN 62368-1
Power Information
To ensure safe operation and to guard against potential shock or risk of fire, ensure your AC power
source for the system is within the required voltage range and frequency.
• Input AC Power Requirement: 100 to 240VAC / 8 to 4A / 47 to 63Hz
Warning: This device uses open-module power supplies with: UNUSUALLY HIGH CURRENT and VOLTAGES! The power supplies
should NEVER have external AC power connected when the chassis top cover is removed. Risk of DEADLY electrical shock is
EXTREMELY HIGH! Always remove all AC power from main chassis BEFORE removing the chassis top cover. For units fitted with
the redundant power supply option, be sure to remove BOTH AC power cords
Operating Environment
The optimum operating environment is within the following ranges:
• Recommended Operating Temperature: 20°C to 35°C (68°F to 95°F)
• Recommended Operating Humidity: 20% to 80% non-condensing
Note: High temperature/humidity should be avoided at all times.
AirCleaner-2 User Manual (v01) — Document Information • v