Panic Setup
AirCleaner
®
can be set up to either defocus any violation content or replace it will the aux in feed. This
applied to both audio and video violations.
To Configure Video Panic Setting from DashBoard
The video panic settings tell the system how to react when the video panic button is pressed.
1.
From the DashBoard tree view for the AirCleaner-2
™
, expand the
Abekas
node and double-click
Settings
.
2.
Click
Concealment
.
3.
In the
VIDEO Concealment Effect
area, select how the system reacts to a video panic button trigger.
•
Defocus
— visual violation is covered by defocusing the live image. The amount of defocus is
determined by the Defocus Level parameter.
•
Switch to AUX IN
— visual violation is covered by switching to the AUX IN video.
4.
(Defocus Only) In the
Defocus Level
field enter the amount of defocus you want to apply to cover a
video violation. (0 to 100)
Tip:
To help determine the amount of defocus you need, feed sample video through the system and press the video panic button.
While holding the video panic button you can adjust the amount of defocus.
5.
(Defocus Only) In the
Defocus Fade Ramp
field enter the amount of time to fade the defocus effect
in. (0 to max)
Note:
The defocus ramp is applied along with the reaction time. This means, for example, that the defocus fade could start the value
of the ramp time (1:00) before the value of the reaction time offset (2:00) is applied, resulting in the defocus fade starting the cumulative
time (3:00) before the trigger point.
6.
Click
Apply
.
To Configure Video Panic Setting
The video panic settings tell the system how to react when the video panic button is pressed.
1.
Use the
SELECT
knob to select
On Video Trigger
.
2.
Use the
SET
knob to select how the system reacts to a video panic button trigger.
•
Defocus
— visual violation is covered by defocusing the live image. The amount of defocus is
determined by the Defocus Level parameter.
AirCleaner-2 User Manual (v01) — Panic Setup • 33