5.
(Swap Only) In the
On AUDIO Concealment
area, select the audio track that you want to substitute
for the track with the violation.
Important:
When you select a different track to be output for the input track, you must select a different track to be used
where the first track was taken from. For example, if you select Track 2 Out to output for Track 1 In, you must select Track
1 Out for Track In.
Tip:
Click Normalize to rest the output track assignments.
6.
Click
Apply
.
To Configure Audio Panic Setting
The audio panic settings tell the system how to react when the audio panic button is pressed.
1.
Use the
SELECT
knob to select
On Audio Trigger
.
2.
Use the
SET
knob to select how the system reacts to an audio panic button trigger.
•
Mute
— aural violation is masked by muting the audio.
•
Audio AUX IN
— aural violation is masked by switching to the Audio AUX IN audio signal.
•
Jumble
— aural violation is masked by jumbling the audio signal.
•
Custom Jumble
— aural violation is masked by jumbling the audio signal on selected tracks.
•
Swap
— aural violation is masked by jumbling the audio signal.
Note:
Configuration of the Custom Jumble and Swap can only be set from DashBoard.
AirCleaner-2 User Manual (v01) — Panic Setup • 35