•
Tracks 9/10
— monitor program audio channels 9 and 10.
•
Tracks 11/12
— monitor program audio channels 11 and 12.
•
Tracks 13/14
— monitor program audio channels 13 and 14.
•
Tracks 15/16
— monitor program audio channels 15 and 16.
5.
In the
Volume
field enter the volume for the headphones. (0 to 255)
6.
Click
Apply
.
To Select the Audio Source for PGM IN
Select the source of the audio that is used for the PGM In.
1.
From the Main Menu, use the
SELECT
knob to select
Options Menu
and press the
SET
knob.
2.
Use the
SELECT
knob to select
PGM IN Audio
.
3.
Use the
SET
knob to select the audio source for the PGM In.
•
AES
— the TASCAM
®
Digital audio input.
•
SDI Embedded
— the embedded audio in the PGM IN SDI video signal on the PGM IN BNC.
4.
Use the
SELECT
knob to select
Save Changes
and press the
SET
knob to select
OK
.
To Select the Audio Source for AUX IN
Select the source of the audio that is used for the AUX In.
1.
From the Main Menu, use the
SELECT
knob to select
Options Menu
and press the
SET
knob.
2.
Use the
SELECT
knob to select
AUX IN Audio
.
3.
Use the
SET
knob to select the audio source for the AUX In.
•
AES
— the TASCAM
®
Digital audio input.
•
SDI Embedded
— the embedded audio in the AUX IN SDI video signal on the AUX IN BNC.
4.
Use the
SELECT
knob to select
Save Changes
and press the
SET
knob to select
OK
.
To Configure the Analog Audio Out Jack
You can select the source and audio level that is fed out of the analog audio headphone jack.
1.
Use the
SELECT
knob to select
Analog Audio OUT
.
2.
Use the
SET
knob to select the audio source for the headphones.
•
PGM OUT 1/2
— monitor program audio channels 1 and 2.
•
PGM OUT 3/4
— monitor program audio channels 3 and 4.
•
PGM OUT 5/6
— monitor program audio channels 5 and 6.
•
PGM OUT 7/8
— monitor program audio channels 7 and 8.
•
PGM OUT 9/10
— monitor program audio channels 9 and 10.
•
PGM OUT 11/12
— monitor program audio channels 11 and 12.
•
PGM OUT 13/14
— monitor program audio channels 13 and 14.
•
PGM OUT 15/16
— monitor program audio channels 15 and 16.
3.
Use the
SELECT
knob to select
Analog Audio Vol
.
4.
Use the
SET
knob to select the volume for the headphones. (0 to 255)
To Embed Audio in the SDI Outputs
You can embed the audio out into the SDI video output on the PGM OUT and TAP OUT output BNCs.
1.
From the Main Menu, use the
SELECT
knob to select
Options Menu
and press the
SET
knob.
2.
Use the
SELECT
knob to select
Embed. Audio OUT
.
AirCleaner-2 User Manual (v01) — Audio Setup • 31