Time 12:00
Another second later and the screener has released the panic button. AirCleaner
®
marks that frame of
video as the end of the violation (as shown by the upward arrow).
Note:
The button release is not advanced by the Reaction Time parameter.
Time 20:00
Eight seconds later the violation is progressing through the video pipeline delay. The start and end of
the violation (as depicted by the two arrows) are marked to tell the system when to switch to the real-time
defocus engine or aux in video feed.
Time 43:00
After twenty-three more seconds the violation is near the end of the video pipeline delay. The first frame
that was marked as the start of the violation is just one second away from triggering the system.
Time 44:00
One second later the first frame of the violation has arrived at the trigger point. If the defocus is being
used the video is routed to the real-time defocus engine.
Tip:
If the Defocus Ramp is set, AirCleaner
®
starts the fade (ramp) to the defocus level before the frame marked as the start of the violation
so that the defocus is fully applied for that frame.
14 • Operation — AirCleaner-2 User Manual (v01)